Grips

These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps. - Size: 130mm/100mm

These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps in satin silver or copper-coloured finish. - Size: 130mm/130mm

In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair

Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

Ergon's GP5 Grips feature an anatomical design that keeps your hands happy while creating a natural wrist angle for the ultimate in comfort. Complementing the sweet feel, these great grips also offer excellent pressure distribution with 100% support for your hands. You get more grip to hold on to, which improves your control for all types of riding — even technical off-road use. You'll love the integrated bar ends for extra leverage on climbs as well as the built-in bar clamps for fast, secure installation. Try them, you won't go back.

The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting

The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)

The GS3 combines comfort in a lightweight package, ideal for long distance endurance athletes. The three-finger bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long mountain bike rides. Additional rubber is used on the bar end, improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Bar end: fiberglass composite with rubber inserts

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting

The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC

Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty

- Classically styled top grain leather grips with contrast stitching - Dual alloy hex bolt lock rings securely attach grip to bar - 130mm length with 32mm diameter grip area - Includes bar end plugs

The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.

Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. Full 130mm set.

Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. The 130mm/100mm set is for use with grip shifters.

The sustainable BioKork version of the GC1 grip, developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 BioKork corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.

The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

Combining ergonomics, function, and sustainability, the GP1 BioKork has been a top-rated grip and a consumer favorite. The grip is made from 40% cork, sourced from sustainable forests in Portugal. This green, sustainable theme is echoed throughout the complete construction of the grip with an inner core made of a reinforced plastic utilizing natural fibers which makes up 20% of its mass. - Carbon bar compatible - Clamp: cold forged aluminium – 100% recyclable - Uses: mountain bike, touring, commuting

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC

Ergon's lightweight GS1 Grips feature an anatomical design that positions your hands and wrists for the ultimate in comfort. To achieve that sweet feel, these great grips deliver excellent pressure distribution with 100% support for your hands. And installation is simple with the built-in bar clamps. With their low weight and outstanding ergonomics, these grips were designed with marathon mountain bikers in mind, so you can be sure they excel for all types of riding, short or long.

Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 for Twist-Shift combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. The package includes an optional adaptor for increased spacing according to the user's preference. This gives the rider a larger gripping position away from the Twist-Shift. Without it, a more compact position. Carbon bar compatible.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Fabric's XL lock-on grip is ideal for wider bars. The soft kraton rubber logo increases comfort and a hidden aluminium clamp provides maximum surface area. Their unique 3 shot manufacturing process provides an extra durable, dual density grip. -Diameter: 31mm -Length: 145mm

Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound

The Ergon GE1 Evo is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench