Parts & Accessories

$139.99
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination.
Featuring:
- 600 Lumen Output Certified to the FL-1 Standard
- Daylight Visible Pulse Mode
- Integrated Battery Pack With Red Rear Lighting
- Innovative Amber Sidelights Provides Critical Side Visibility at Intersections
- Ultra-lightweight Setup With Easy Clip On/Off Design
- Waterproof to 1 meter For All-Conditions Reliability
- Accurate Battery Charge & Status Indicator
- Micro USB Rechargeable
Included:
- Helmet Mounts & Micro USB Charging Cable

$65.00
You need to get out on your bike even in terrible weather. Fitting in an early commute or a mid-winter ride is easier when you're warm, comfortable, and visible. Keeping your head warm in bad weather can be the best way to fend off the elements.
- GORE-TEX Product: durably waterproof, windproof and extremely breathable
- Reflective band
- Elastic hem
- Reflective logo
- Durably waterproof
- Extremely breathable
- All weather conditions
- Engineered for Cycling
- Weight: 0.8 ounces

$39.99
Magnetic mount lens for Lazer Bullet 2.0 helmet.
The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: magnetic
- WEIGHT: 24g
- MATERIAL: Polycarbonate

$35.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$34.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: G1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$24.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
This optional taillight can be added to certain models of Lazer helmets and provides additional visibility on the helmet. It fits inside dock within the Century MIPS or Century helmet, or mounts to the Mudcap when used with the Z1 MIPS, Z1, Blade+ MIPS or Blade+ helmets. Note, the Z1 LED Mudcap (PLZ2005660134) or Blade Mudcap (PLZ2167882106) must be used with the corresponding helmet in order to mount this light. No Mudcap is required with the Century series helmets.
COMPATIBILITY
- Century MIPS
- Century
- Z1 MIPS
- Z1
- Blade+ MIPS
- Blade+
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 1.5 hours
- RUN TIME: 27 hours
- LUMENS: 4 lumens
- ATTACHMENT: Century helmet
- WEIGHT: 11g
- MATERIAL: LED light

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$16.95
PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts.
- Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain)
- Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible
- T Slot (For modular): Allows for quick release of the light when parking your bike
- Weight: 20g

$14.99
Visor for Coyote helmet
COMPATIBILITY
- Coyote MIPS
- Coyote
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$12.00
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$11.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
LED light for Lazer TSPLUS retention system
COMPATIBILITY
- Tonic MIPS
- Tonic
- Tardiz2
- Coyote MIPS
- Coyote
- Chiru MIPS
- Next+
- Compact DLX MIPS
- Compact DLX
- Compact
- BATTERY TYPE: CR2032 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: TS+ mechanism
- WEIGHT: 12g
- MATERIAL: LED light

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set!
Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad
COMPATIBILITY
- Urbanize MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$6.99
Screws for Impala visor.
- COMPATIBILITY: Impala MIPS, Impala
- WEIGHT: 1g
- MATERIAL: Aluminum

$6.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Jackal helmets

$6.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Sphere helmets
- Attachment: Velcro
- Material: Foam

$5.99
Keep the ARS fit system clear of debris and serves as a mount for LED taillight accessory. Note: not compatible with LifeBeam accessory.
Adds protection to keep ARS retention system clear of debris on Z1 helmet. Also allows the Z-LED or Century LED taillights to be used with the Z1 helmet.
- COMPATIBILITY: Z1
- ATTACHMENT: ARS mechanism
- WEIGHT: 8g
- MATERIAL: Polycarbonate
Page 1 of 2
Next page