A waterproof, bikepacking-inspired / urban-inspired seat pack bag that is quickly attached/removed via an ingenious quick-release seatpost mounting system. Ideal for the commuting trunk bag user who doesn’t want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Universal Rixen & Kaul CONTOUR MAX seatpost bracket with 2 sets of seatpost clamps. (25-32mm & 32-36mm) – 3kg load rating (not including bag weight). - 8mm Engineered aluminum frame provides stiffness and load stability. - *Not advised for carbon fibre or ultra-lightweight seatposts. - Intuitive waterproof roll-down closure system provides flexible load management. - Front external mesh pocket with Velcro closure. - Outer bungee system with wings, allows excess gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Ultra-visible three-way 3M triangle logos. - Polypropylene side stiffeners and dimensional foam top/bottom stiffeners provide additional load stability. - Supplemental rear closure strap system provides additional support. - Built-in U-lock holder. - Rear light clip. - Volume 12L / 732 cu/in - Weight 795g / 1.75 lbs (incl. bracket), 725g / 1.6 lbs (without bracket) - Dimensions 44x18x16-inches / 17.3-inches x7.1-inches x6.3-inches
The iconic big seat bag for big trips! The Viscacha (vis-KA-cha) does it all. Take it on the Great Divide Route, the Iditarod trail, or any other epic route. Proven time after time in the longest and hardest endurance events on the planet, whether dirt, pavement, or snow. Features: - Roll-down closure allows bag to expand or compress in volume - EVA stiffened front and bottom plastic sheet provide rigidity and structure for load carrying - Adjustable position saddle rail strap with urethane-coated webbing provides fore-aft adjustment along saddle rails - Internal compression strap for snug packing and internal separation - Overkill aluminum loop seatpost wrap strap - Loops on top for attaching a bungee or spocket - Carbon seatpost friendly - Made in the USA with domestic and imported materials Sizing: - Minimum of 9.5" clearance from saddle rails to top of tire - Minimum length of exposed seat post is 5" - This is a big seat bag. Check tire clearance with bag properly packed and loaded prior to use to prevent bag damage or worse. On full suspension bikes fully compress rear suspension and check tire clearance prior to use. Using a Thudbuster post? See www.revelatedesigns.com for more information. Specifications: - Weight: 13.8 oz. - Volume: 6L - 14L - Materials: VX 21 X-pac; Rhinotec gusset panel; high-density EVA foam; HDPE plastic
The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L
The EXP Series Seat pack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes, and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Roll type closure and air purging valve that allows for managing overall volume - Stretch cord storage on top - Durable 1000D material strategically placed in high wear areas - Weight: 380g - Capacity: 6 – 14 Liters
Ortlieb's Seatpost-Bag is an easy way to add extra carrying capacity to your bike. Tool-free mounts make it easy to get on and off, and switch from bike to bike. The roll-top closure makes it sealed from the weather and splashes, and allows for tight packing. The whole thing is made from waterproof nylon and Cordura, and even acts like a fender, keeping your back muck free. It's available in two sizes, the small one being suitable as additional bag for longer trips, the large version might even replace a backpack.
The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L
Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.
$74.95 - $84.95
Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button
The Packer Bag is the perfect seat bag with all the extra room needed for carrying the essentials. The Packer is the perfect accessory for commuting, bike packing, touring, mountain biking, road biking. - Roll up style closure with quick release buckles - Shock cord for mounting extra gear on top of the bag - Reflective accents and light holder - Water resistant 840 denier nylon/TPU - 18” x 7” x 6” - Up to 750 cubic inches
The Isle of Wight Saddle Bag is a smart, practical bag to accompany the rider on every journey. Constructed from waterproof bluesign material and genuine Brooks Leather, the bag features a unique double zip for easy access to your valuables, with room enough for multi tools, and an innertube. - Width: 100mm - Height: 110mm - Depth: 180mm - Volume: 1.2L
Not only does Banjo Brothers' Minnehaha Canvas Saddle Bag give you huge carrying capacity, it classes up any ride. You can pack a picnic and extra clothes while the 3-point attachment and hardwood internal support keep the load stable. The main panel of the bag boasts a durable, layered 18-ounce canvas construction and the bottom is reinforced with a riveted plate to keep your bag from sagging under load. Clever details include detachable reflective tabs, an interior wallet pocket and exterior lashing points so you can attach a jacket or walking shoes.
The EXP Series Seatpack keeps gear high, centered, and in line with you and your bike. Much like a dry bag or stuff sack, the EXP Series Seat pack fits a wide range of load sizes and dutifully carries anything you need on your next two-wheeled mission. - Water-resistant welded construction with waterproof fabrics - Durable 500D coated nylon material strategically placed in high wear areas - Roll type closure with buckle for managing overall volume - Adjustable seat rail mounting strap included - Weight: 184g - Volume: 3L
Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs
Durable, rigid and weather resistant saddlebag made thermoformed EVA with water proof zipper. Volume is 75 cubic inches and enough room for a tube with a fat bike. - Interior mesh divider - Rear Light holder - T-Bar mounting (no tools needed) - Reflective piping
The Transporter from BiKASE is a seat bag designed to haul a ton of stuff. With a 110 cubic inch capacity, what can't you carry under your seat? Designed with Fat Bikes in mind, this would also make a great seat bag for anyone looking to haul tubes, tools, CO2, snacks, or whatever you can think of. • Waterproof zippers • Multiple compartment/mesh pockets • Reflective webbing light holder • PE stiffener structure • Molded Velcro straps for seat post mounting • Great for Fat Bikes • 840 denier nylon
Ortlieb's Saddle-Bag Two is particularly suited for mountain and road biking, but is also an ideal supplementary bag for long tours with lots of luggage. Even the small version offers enough space for a spare tube, repair kit or rain jacket, whereas the larger model with 4.1 L almost replaces a backpack. It functions at the same time as kind of protection against mud and water spray just like fenders. Both models feature highly luminescent reflectors and daisychains for fixing a tail light. The roll closure is secured to the sides with buckles. The mounting set is available as accessory for a second bike. Saddle-Bag Two is made of PVC-free, sturdy nylon fabric, and is sustainably produced in Germany. OPTIONAL ACCESSORIES (each sold separately) - Seat mounting for saddlebag (art. code E97) - Strap system (article code F96 E) for fixing to comfort or spring saddles
XLAB has designed the first aerodynamic repair storage bag for single rear systems with their Aero Pouch 300. It sports a compact, sleek design while carrying a great deal of essential repair tools. • Fits around the bottle cage on all metal XLAB single rear systems • Simple install by using the 2 bottle cage holes • Actually helps the drag behind you by collecting the air into a smooth airflow • Velcro zipper pull stays down to avoid zipper flapping drag Includes: • AERO POUCH 300 bag • All required hardware for mounting onto metal DELTA systems • Installation Instructions Material: • Tough woven nylon • Rigid insert to maintain shape • Weight: 107 grams Fits all metal XLAB single rear systems • DELTA 300 • DELTA 400 • DELTA 425 • DELTA SONIC • DELTA SONIC XL
No rack, no problem. Banjo Brothers' Waterproof Saddle Trunk has a whopping 400 cubic inches of space with a waterproof main compartment and outer pockets for easy access to smaller items. A webbing loop on top lets you lash a jacket to the bag so you can reach it before the rain comes. An interior aluminum strut, stiff hull and 4-point strapping system control the load from bouncing, rattling or swaying. The best part is when you're done with your ride, you can remove it quickly and it works on pretty much any bike. - Weight: 1.25lbs - Dimensions: 12.5" L x 7" H x 6.5" W - Capacity: 400 cubic inches / 6.6 liters - Waterproof main compartment with replaceable welded liner - Outer pockets for easy access to money or keys - Webbing loop on top for attaching a rain jacket or other gear - Interior aluminum strut, stiff HDPE hull and 4-point strapping controls loads
Lezyne's M-Caddy with CO2 Repair Kit is a complete and convenient solution for the rider with speed in mind. It features a Twin Speed Drive CO2 inflator, two 16g CO2 canisters, a RAP 6 multi-tool, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for a competition or any situation where a quick repair and tire inflation is a must.
Fizik 00 Saddle Bag: The thermoformed Microtex Hardcase construction is tough, lightweight and weatherproof, forming a sleek, efficient bag that opens out wide to allow easy access to all contents. One spacious compartment with padded lining has room to carry your inner tube, tire levers, CO2 canister and inflator. The water-resistant zip running around the outside of the 00 Bag has a semi-auto lock puller, for ease of use at the roadside and added security on your ride, while its Thermoplastic Rubber welded strap is secure and hard-wearing, enabling easy fixture to any bike. - Thermo-formed classic Microtex - Injected TPR closure system and logo - Padded inner lining
BiKASE's Wing Side Open Seat Bag offers easy access to your belongings. No more reaching way back and trying to find your stuff as compared to rear entry bags. It features external pockets for small items and attaches easily with molded nylon T bracket and 2 hook & loop straps. With 110 cubic inches of storage capacity, it will even hold a windbreaker for those longer rides when the weather changes! Will hold a fat tire tube as well. • 2 side pockets • 2 Teflon coating mesh pockets • Webbing light holder/Rear reflective dots • PE stiffener structure • Universal-fitting T-bar mount • 2 Velcro straps for seat post mounting • Material: 840 denier nylon • Teflon coating fabric • Size: 20cm x 11cm x 10cm • Volume: 1.8 Liter • Weight: 180 g
Packaged in a seat bag with reflective strips, the Deluxe Inflation Kit allows riders to fix bikes on the go. So quick and easy you’ll be back to riding your bike in no time! • Includes the UltraFlate, with Trigger Controlled technology • Built in “Trigger Lock” prevents accidental discharge • Includes three 16 gram non-threaded CO2 cartridges • Includes a small patch kit & two tire levers • All packaged in a seat bag with reflective strips • Works with both Presta and Schrader valves Ultraflate specs: • Cartridge compatibility: 12, 16, 20, 25 gram threaded & non-threaded CO2 cartridges & Big Air! (each sold separately) • Construction: Glass reinforced nylon with brass internals. • Weight: 62 grams Seat bag specs: • Volume: 40.25 cubic inches (660ml) • Size: 8 x 3.75 x 3 inches • Weight: 64 grams • Construction/features: Rugged Polyester, Reflective rubberized piping, mesh pockets on flap and side wall to secure items, and light mount. Velcro strap attaches to any bike seat post.
Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. This loaded kit comes with a RAP-13 multitool, a pair of white Matrix Tire Levers, and a Smart Kit for patching tubes. The M-Caddy also boasts a reflective taillight loop for safety.
Topeak's SideKick Wedge Pack features a unique, positive locking 2-piece mount that makes attaching and removing the pack a snap. Its unique side-opening design makes accessing your gear quick and easy and you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective strip adds safety and its semi-rigid construction makes the Wedge Pack durable and tough.
A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 1.3 L / 79 cu in - Weight 93g / 0.21 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating and a red interior liner to improve internal visibility - Lightweight Velcro saddle mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Ultra-visible 3M triangle logo - LED light clip
$35.00 - $40.00
Following the motto “less is more“, the super lightweight saddlebag transports everything you need to take along your road bike or mountain bike. The handy roll closure with elastics ensures tight and waterproof storage of your gear. Super small dimensions allow mounting to your bike requiring very little space. Two metric screws permit easy mounting to the saddle rails. With the click and snap closure the saddle bag can be taken off with just one hand. A strong reflector provides safety in dusk and at night. Micro Two is PVC-free and sustainably produced in Germany. OPTIONAL ACCESSORY (each sold separately) - Seat mounting for saddlebag (article code E97) - strap system (article code F96 E) for fixing to comfort or spring saddles
- Reflective logo on the back and both sides - Made of environmentally PVC-free material - 2 side compartments - Volume: 2L
The Mountain Wedge Expandable is the ideal wedge for the rider who occasionally wants to carry extra gear. - The three-point suspension system, with a side-release buckle on the main strap for easy access - Hook-and-loop material on the sides for added stability and load compression - The main strap provides support in both closed and expanded modes - Flat pocket on the underside of the bag - Made of Dupont Cordura - 3M reflective trim - Weight: 190 grams - Capacity: 115 cubic inches
Long days in the saddle training and racing take their toll on your equipment. Tri-BackUp TireBag provides protection from harmful ultra violet rays that can quickly degrade a tubular tire. So the next time you have to replace your tubular tire, it’s ready to go. Designed to integrate with Tri-Backup Pro V and Tri-Backup Pro I for maximum aerodynamic efficiency. - Material: 420D nylon - Mount: Works w/ TRI-BackUP Pro V / Pro I; Top tube; Saddle rails - Compatibility: Up to 700 x 25c tubular tire (Max folded length 8.7 cm / 3.4”) - Round Tube Diameter: Fits 23/48 mm - Aero Tube: Fits up to 260 mm (10.2”) circumference - Added Features: Side pockets for up to four 16g CO2 cartridges Zipper docks - Size: 25.8 x 7.8 x 4.6 cm / 10.2” x3.1” x 1.3” - Weight: 107 grams
Page 1 of 4 Next page