Skip to main content

Filter By:

Aero

Profile Design Aeria Evo
$874.99
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Profile Design Aeria Wing T2 Aluminum Aerobar
$370.99
With only 8 hidden marine grade bolts controlling 6 simple points of adjustment, this elegant aluminum integrated aerobar system can easily fine-tune to the millimeter to fit any type of rider. Aeria T2 Aerobars are designed with a lower profile in the wind to create less drag with S-bend extensions for a more race-oriented aggressive ride with lower hand positions. - Aerodynamic Aluminum Wing: UCI Compliant 3:1, aerodynamic aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Stackable Risers: Slim, sleek risers fine-tune armrest/extension height to get a perfect blend of aerodynamics, power and comfort. - Integrated Bracket: Lightweight, simple and easy to adjust. The patent-pending bracket system simultaneously clamps the extensions while attaching the brackets to the wing. This design yields a smaller profile in the wind, creates less drag, and minimizes corrosion issues from exposed bolts. - F-35i Injected Armrest:3x fore/aft positioning, providing 30mm of adjustment for customized fit. - T2+ Aluminum Extensions: Aeria T2 ships with the race-oriented T2+ Aluminum extension for the most aggressive positioning. The S-Bend extension shape combined with the 30mm rise, provides a variety of low hand placement positions. Tech Specs: - Armrest: F-35i Injected Armrest - Stack: 55mm-135mm (highest stack available of any Profile Design model) - Reach: -60mm, -40mm, -30mm or -10mm with the bracket flipped - Extension Adjustment: 200mm-300mm (T2+ Aluminum extensions) - Extension Drop: 0mm - Width: 42cm (center to center) - Center Clamp Diameter: 31.8mm - Armrest Width: 155mm-203mm - Weight: 850g
Profile Design Aeria Wing AL Aero Bars
$349.99
When you're in it to win it, you need Profile Design's Aeria Wing Aero Bars! Designed for maximum aerodynamics, amazing adjustability, and superior handling, this beautiful front end sets a new standard. For the ideal blend of power, control and aerodynamics, it boasts Profile's aluminum wing base bar with ergonomic grips, stackable risers for fine-tuning armrest and extension height, their F35i armrests that can be rotated and moved fore/aft, and their T2+ or T4+ aluminum extensions that also are fully adjustable. This all means that you can dial in the ultimate fit to fly down the road and change it as you get stronger, more flexible, and even faster! Multiple drillings and routing options offer loads of options for internal cable routing and electronic Di2 compatibility.
Profile Design Ozero Base Bar
$154.99
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Profile Design WING/10a
$84.99
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Profile Design Stoker 26 Base Bar
$47.99
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Page 1 of 1